DRV8701ERGER DRV8701PRGER Power Path Management IC Motor / Motion / Ignition Controllers & Drivers Atlas 1p0
battery charge management ic
,power management integrated circuit
DRV8701ERGER DRV8701PRGER Power Path Management IC Motor / Motion / Ignition Controllers & Drivers Atlas 1p0
1 Features
- Single H-Bridge Gate Driver
-
– Drives Four External N-Channel MOSFETs
-
– Supports 100% PWM Duty Cycle
-
5.9-V to 45-V Operating Supply Voltage Range
-
Two Control Interface Options
-
– PH/EN (DRV8701E)
-
– PWM (DRV8701P)
-
-
Adjustable Gate Drive (5 Levels)
-
– 6-mA to 150-mA Source Current
-
– 12.5-mA to 300-mA Sink Current
-
-
Supports 1.8-V, 3.3-V, and 5-V Logic Inputs
-
Current Shunt Amplifier (20 V/V)
-
Integrated PWM Current Regulation
– Limits Motor Inrush Current
-
Low-Power Sleep Mode (9 μA)
-
Two LDO Voltage Regulators to Power External Components
-
– AVDD: 4.8 V, up to 30-mA Output Load
-
– DVDD: 3.3 V, up to 30-mA Output Load
-
-
Small Package and Footprint
– 24-Pin VQFN (PowerPADTM)
– 4.0×4.0×0.9mm • Protection Features:
-
– VM Undervoltage Lockout (UVLO)
-
– Charge Pump Undervoltage (CPUV)
-
– Overcurrent Protection (OCP)
-
– Pre-Driver Fault (PDF)
-
– Thermal Shutdown (TSD)
-
– Fault Condition Output (nFAULT)
2 Applications
• Industrial Brushed-DC Motors • Robotics
• Home Automation
• Industrial Pumps and Valves • Power Tools
• Handheld Vacuum Cleaners
3 Description
The DRV8701 is a single H-bridge gate driver that uses four external N-channel MOSFETs targeted to drive a 12-V to 24-V bidirectional brushed DC motor.
A PH/EN (DRV8701E) or PWM (DRV8701P) interface allows simple interfacing to controller circuits. An internal sense amplifier allows for adjustable current control. The gate driver includes circuitry to regulate the winding current using fixed off-time PWM current chopping.
DRV8701 drives both high- and low-side FETs with 9.5-V VGS gate drive. The gate drive current for all external FETs is configurable with a single external resistor on the IDRIVE pin.
A low-power sleep mode is provided which shuts down internal circuitry to achieve very-low quiescent current draw. This sleep mode can be set by taking the nSLEEP pin low.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
DRV8701 |
VQFN (24) |
4.00 × 4.00 x 0.90 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|