Contact Us

Contact Person : VIVI

Phone Number : 18124796596

WhatsApp : +18124796596

Free call

Water Tank Disinfection UVC LED Tube 275nm 12mW DC 12V With Feedback Circuit

Minimum Order Quantity : 1 Price : Negotiation
Packaging Details : normal safe packaged Delivery Time : in stock
Payment Terms : T/T, Western Union, paypal Supply Ability : 10000
Place of Origin: CN Brand Name: DELI
Model Number: DL-UVC275-WTS-01

Detail Information

Voltage: DC 12V Wavelength: 275nm
Power: 6-7mW/UVC LED, 12-14mW In Total. UVC: 2 UVC LEDs
White Head Wire:: Connect To Power Source Black Head Wire:: Connect To Feedback Signal
Part No.:: DL-UVC275-WTS-01
High Light:

uvc led light

,

uvc light fixtures

Product Description

Immersed Still Water Sterilizer Water Tank Disinfection UVC LED Tube 275nm 12mW DC12V

 

Parameters:
Voltage: DC 12V
Wavelength:  275nm

Lifetime:10000hours+
Power:  6-7mW/UVC LED,   2 UVC LEDs,  12-14mW in total.
White Head Wire:  connect to power source
Black Head Wire:  connect to feedback signal ( in case water leaking )

Contact me for details 

 

1. Basic outline diagram

Water Tank Disinfection UVC LED Tube 275nm 12mW DC 12V With Feedback Circuit 0

 

 

2. Structure diagram

Water Tank Disinfection UVC LED Tube 275nm 12mW DC 12V With Feedback Circuit 1

 

3.Schematic diagram of module dimension (quartz tube outer diameter ¢ 17mm * inner diameter ¢ 14mm)

Water Tank Disinfection UVC LED Tube 275nm 12mW DC 12V With Feedback Circuit 2

 

4.Schematic diagram and installation dimension of module installation structure

 

Water Tank Disinfection UVC LED Tube 275nm 12mW DC 12V With Feedback Circuit 3

 

 

5.Design description

1)The position of the lamp bead is designed to avoid the silica gel shining on the tail of the lamp plate. The irradiation angle of the UVC lamp bead is 120 degrees, and it will not directly irradiate the silica gel at the bottom, as shown in the following figure;

 

2) As for the heat dissipation of the module, through the calculation of 40mA current and 5-6v voltage of the module, the heat energy converted from the electric energy can be heated up to 1 ° for more than 43h, even if there is no loss; while the product's own base plate adopts aluminum base plate and does not contact with quartz tube directly, most of the heat will be transmitted to the top and slowly dissipated, Therefore, the heating of this part can be ignored, and no special heat dissipation structure design is required

 

Water Tank Disinfection UVC LED Tube 275nm 12mW DC 12V With Feedback Circuit 4

 

 

6.The product adopts the snap fit and installation mode, which is simple and convenient, and is designed with a positioning slot to prevent the dead, so that the reverse installation will not occur;

 

The UV module has water leakage sensing function, which can effectively prevent damage and injury to the product or human body after the lens is accidentally broken; the water leakage sensing contact is located at the bottom of PCB, as shown in the figure below.

Water Tank Disinfection UVC LED Tube 275nm 12mW DC 12V With Feedback Circuit 5

 

Water Tank Disinfection UVC LED Tube 275nm 12mW DC 12V With Feedback Circuit 6

 

Deli electronics tehcnology co ltd
www.icmemorychip.com
www.uvc-led.net
Email:sales3@deli-ic.com
Skype:hkdeli881
Contact: VIVI-CHEN

 

You Might Be Into These
Get in touch with us

Enter Your Message

sales3@deli-ic.com
+18124796596
18124796596
hkdeli881