Contact Us

Contact Person : VIVI

Phone Number : 18124796596

WhatsApp : +18124796596

Free call

TQFP-100 16Bit Flash Microcontrollers Graphics Controller PIC24FJ256DA210-IPT

Minimum Order Quantity : 10pcs Price : To be negotiated
Packaging Details : Reel Delivery Time : in stock 2-3days
Payment Terms : T/T, Western Union ,paypal Supply Ability : 10,000PCS
Place of Origin: USA Brand Name: MICROCHIP
Certification: CE/ RoHS Model Number: PIC24FJ256DA210-IPT

Detail Information

BITS: 16-Bit Flash TYPE: Microcontrollers IC
High Light:

16Bit Flash Microcontrollers Graphics Controller


TQFP-100 Flash Microcontrollers Graphics Controller



Product Description

PIC24FJ256DA210-IPT  16-Bit Flash Microcontrollers with Graphics Controller and USB On-The-Go (OTG)



Graphics Controller Features:
• Three Graphics Hardware Accelerators to Facilitate
  Rendering of Block Copying, Text and Unpacking of Compressed Data
• Color Look-up Table (CLUT) with Maximum of 256 Entries
• 1/2/4/8/16 bits-per-pixel (bpp) Color Depth Set at Run Time
• Display Resolution Programmable According to Frame Buffer:
- Supports direct access to external memory on devices with EPMP
- Resolution supported is up to 480x272 @ 60 Hz, 16 bpp; 640x480 @ 30 Hz, 16 bpp or  640x480 @ 60 Hz, 8 bpp
• Supports Various Display Interfaces:
- 4/8/16-bit Monochrome STN
- 4/8/16-bit Color STN
- 9/12/18/24-bit Color TFT (18 and 24-bit displays are connected as 16-bit, 5-6-5 RGB color format)
Universal Serial Bus Features:
• USB v2.0 On-The-Go (OTG) Compliant
• Dual Role Capable – Can act as either Host or Peripheral
• Low-Speed (1.5 Mbps) and Full-Speed (12 Mbps) USB Operation in Host mode
• Full-Speed USB Operation in Device mode
• High-Precision PLL for USB
• Supports up to 32 Endpoints (16 bidirectional):
- USB module can use the internal RAM location from 0x800 to 0xFFFF as USB endpoint buffers
• On-Chip USB Transceiver with Interface for Off-Chip Transceiver
• Supports Control, Interrupt, Isochronous and Bulk Transfers
• On-Chip Pull-up and Pull-Down Resistors
Peripheral Features:
• Enhanced Parallel Master Port/Parallel Slave Port
  (EPMP/PSP), 100-pin devices only:
- Direct access from CPU with an Extended Data Space (EDS) interface
- 4, 8 and 16-bit wide data bus
- Up to 23 programmable address lines
- Up to 2 chip select lines
- Up to 2 Acknowledgement lines (one per chip select)
- Programmable address/data multiplexing
- Programmable address and data Wait states
- Programmable polarity on control signals
• Peripheral Pin Select:
- Up to 44 available pins (100-pin devices)
• Three 3-Wire/4-Wire SPI modules (supports 4 Frame modes)
• Three I2C™ modules Supporting Multi-Master/Slave modes and 7-Bit/10-Bit Addressing
• Four UART modules:
- Supports RS-485, RS-232, LIN/J2602 protocols and IrDA®
• Five 16-Bit Timers/Counters with Programmable Prescaler
• Nine 16-Bit Capture Inputs, each with a Dedicated Time Base
• Nine 16-Bit Compare/PWM Outputs, each with a Dedicated Time Base
• Hardware Real-Time Clock and Calendar (RTCC)
• Enhanced Programmable Cyclic Redundancy Check (CRC) Generator
• Up to 5 External Interrupt Sources
TQFP-100 16Bit Flash Microcontrollers Graphics Controller PIC24FJ256DA210-IPT 0

Deli electronics tehcnology Co.,Ltd
Contact: VIVI-CHEN


You Might Be Into These
Get in touch with us

Enter Your Message